Three sections with height and tilt independent adjustment. The Atlant chair can be used as a wheelchair for moving the patient and as an operating table. Electromagnetic brakes securely block the wheels whilst the surgery is on process. The wheel brakes are controlled by foot pedals located on the X-shaped ergonomic base. Additional fifth wheel for increased maneuverability on turns during transportation of the chair.
Powered by Froala Editor
Electric control
The Atlant chair is controlled by the hand control unit. The control foot pedal could be added additionally.
Headrest with 3D adjustment
Ergonomic shaped headrest, simple Quick-Fix fixation. Can be adjusted in three directions.
Brand X-shaped base
The frame is made of durable metal; four wheels are fixed to the X-shaped frame.
Central wheel
Maximum maneuverability and easy to move.
Electric control
The Atlant chair is controlled by the hand control unit. The control foot pedal could be added additionally.
Headrest with 3D adjustment
Ergonomic shaped headrest, simple Quick-Fix fixation. Can be adjusted in three directions.
Brand X-shaped base
The frame is made of durable metal; four wheels are fixed to the X-shaped frame.
Central wheel
Maximum maneuverability and easy to move.
Efficiency
The Atlant chair-transformer replaces the operating table and wheelchair. Without any patient transfer the operation can start immediately by setting the chair in a comfortable position for the patient and the correct height and position for the operator. In the operation theater the chair folds out 180 degrees into an operating table.
After surgery, table transforms back to the chair and the patient is returned to the recovery room again, without any patient transfer. The patient stays in the Atlant chair during the whole procedure, from admission, surgery to recovery.
Electric control
Each section of the chair can be adjusted alone: you can change their height and inclination. There are 5 memory positions you can put in the control unit. Trendelenburg position is available as well.
Headrest with 3D adjustment
The unique structure of the bracket allows you to adjust the headrest position in three directions: length, angle and rotation. It allows you to ensure the patient comfort throughout the operation. Thanks to the ease of manual adjustment, the specialist feels the patient's head and can fix it's position perfectly.
Brand X-shaped base
Four-wheeled X-shaped base allows you to place the operating chair as closer to the microscope as possible. On the surgeon's side, the base has a horseshoe shape, which provides sufficient space for the location of the microscope control pedals and the surgery combine. All wheels are pivoted.
Central wheel
The central, fifth, wheel provides the ability to turn the chair around it is axis 360 degrees without the serious physical efforts. Maximum maneuverability is achieved when transporting the patient through corridors with 90-degree corner turns.
In normal mode, this wheel is inactive. If necessary, it is put down at the the same level with the main wheels. Also, the control of the chair is facilitated, thanks to the retractable telescopic handgrips.
Electric brake
Electric brakes are activated by pressing the aseptic foot control pedals located on the X-shaped base. Safety locking wheels mechanism for the case of the electric clutch failure.